Deluxe Scrim Banners - Banner Printing
PREMIUM QUALITY - Our EcoSolvent print technology does not leave an ink texture like most UV cured ink printers. Offset print quality with high 720dpi resolution and smooth to the touch.
Our banners are premium full color prints on premium 13 oz. matte, scrim vinyl banner material. Our matte finish banner provides low glare for greater readability and a richer, higher quality appearance than competitors' glossy banners. Waterproof, strong and tear resistant. Indoor or outdoor use. Standard finishing includes corner grommets and hemming included on banners over 5 feet.
60 inches x any length
- For larger sizes, please see our Grand Format Banners
PRINTED SIDES: One
PRINT METHOD: High Gamut 8 Color Process (C, M, Y, K, Lc, Lm, O, G)
USE: Indoor or Outdoor - Fire retardant, meets NFPA 701
WEIGHT: 13 oz. Scrim = .09 pounds per sq. ft. (36x96 = 2.4 pounds)
THICKNESS: Approximately 15mil
FINISH: Low Glare, Matte Finish, 1000 x 1000 denier, 9 x 9 scrim
SIZES & FINISHING
Banners can be made just about any size but below are some common sizes:
MAXIMUM SIZE: 60 inches x any length
For larger size, please see our Grand Format Banners
STANDARD: Hemmed on all four sides and grommets approximately every two feet.
TRIM TO SIZE: Trimmed to size. No grommets included but can be added upon request in your special instructions.
POLE POCKETS TOP & BOTTOM: 3 inch pole pockets at the top and bottom of the banner for hanging or carrying by a dowel and a bottom dowel for weight.
POLE POCKETS ON SIDES: 3 inch pole pockets on the left and right sides of the banner for stretching between two poles.
ROUGH CUT: You banners will be cut from the print run but not trimmed to size for final finishing by you. Necessary white space, bleeds or pockets space should be included in your art file and your ordered dimensions.
Preferred Design Programs: Adobe Illustrator, Adobe InDesign, CorelDraw
Required File Format: Adobe PDF
Print files should be supplied as Press Ready PDF files in CMYK. Photos should be 100dpi at final size, text and line art 300dpi at final size.
Photoshop: Save a copy of your work. Make sure your color space is set to CMYK. Flatten all layers. Save image as a press quality PDF. If your work contains small text (12 points our under) we recommend using a resolution of 400DPI or 600DPI at final size.
Common uses include trade shows, birthdays, store or business openings, temporary signage, sale signage and all sorts of special events.
Suitable for indoor or outdoor use in direct sunlight and wet conditions. Clean with warm water and mild soap, rinse well. Dry completely before rolling or storing. Wrinkles in banners should relax after a few hours exposed to the sun - if indoors, you may warm gently with a hair dryer to release wrinkles. Do not crush or expose to high heat.